For example, there are five different formats for DVDs and Blu-ray discs have even more formats! In this article, I’ll try to break down the different types of formats without worrying about a lot of technical details that you’ll find when you read about the differences on other sites.
I personally just want to know the main differences, what works better and what’s best suited for burning as a consumer.
DVD+R, DVD-R, DVD+RW, DVD-RW, DVD-RAM
To get started, you should first know the actual order that these different DVD formats were created. In 1996 DVD-RAM was developed, followed by DVD-R in 1997, followed by DVD-RW, then DVD+RW, followed by DVD+R in 2002. So that hopefully clears a little confusion as to the timings.
So now, what format is better? Well, if you want to burn a DVD that is compatible with a larger number of DVD players, then it’s best to stick with the earlier released DVD-R format. DVD-RAM is basically really old and it’s hard to even find those anymore unless you go on eBay.
DVD+R has some advantages over DVD-R in terms of error checking, better tracking and speed control resulting in more reliable media, and additional session linking methods, which results in fewer damaged discs. Most of the differences are very technical in nature, but allow for faster writing speeds and more rewrites without errors.
Of course, the W added to either + or – (+RW, -RW) just means that the disc is rewritable. Again, the + format is more reliable because it was released later, but more drives are compatible with the minus format. However, it’s been long enough that unless someone is using a really old DVD drive, they should be able to play any plus(+) format DVDs.
DVD single layer discs can support up to 4.7 GBs of data and double layer discs (DL) can support up to 8.5 GBs of data. The latter format just adds a DL to the end: DVD+RW DL or DVD-RW DL.
BD-R, BD-RE, BDXL, Mini-BD
When it comes to Blu-ray disc formats, it’s really confusing, so I won’t even mention the stuff that’s not important. Basically, there are only a couple of formats you need to worry about as a consumer and those are BD-R (Blu-ray disc recordable), BD-RE (Blu-ray disc recordable erasable), BDXL (multi-layer disc recordable), and Mini-BD.
BD-R format can only be written to once and BD-RE can be erased and recorded on again multiple times. The max speed currently available for Blu-ray discs is about 16x, which is much lower than the 20x and 52x speeds of DVDs and CDs, respectively.
Mini-DB discs are basically BD-R and BD-RE formatted Blu-ray discs made for camcorders and other small digital recording devices. Within the last few years, a newer format called BD-XL has been defined that allows for triple and quadruple layers on a single disc.
This ups the capacity of a BD-R XL disc to 100 GB and 128 GB, respectively. That’s huge! BD-RE XL discs can support up to 100 GB of data at this time.
The newer BDXL discs are not compatible with current Blu-ray disc drives, though some manufacturers are able to release a firmware upgrade, but the drive has to be fairly new to support the upgrade.
Basically, if you plan on using the BDXL format, it should be archival purposes as you’ll probably be the only one to read the data back using your very expensive Blu-ray drive that supports the BDXL format.
Again, this is a very basic overview of the different formats for DVD and Blu-ray, but hopefully it gives you enough to understand what everything means without getting overloaded in lots of useless details.
Any other questions about what type of disc your should burn, post a comment here and I’ll try to help. Enjoy!
